Today, I would like to share with you the production method of the drawer-type storage box

1. Cut the wrapping paper according to the bottom area

Box of packaging (cover) bottom. Cut out a piece of wrapping paper the same size as the bottom area of the body (cover), and paste the wrapping paper to the bottom of the body (cover) with double-sided tape.

2. Stick the wrapping paper

Fixed the wide edge wrapping paper of the box body, gently press the remaining wide edge wrapping paper and paste it to the long edge.

3. Stick the other half of the long side of the box body, it will form an isoscelisted trapezoid, and fold the isoscelisted trapezoid into the box, fixed.

4. Packaging box body

Cut out a length is equal to the box length + box high 4 + 1 cm, width is equal to box wide + box high 4 + 1 cm packaging paper, the box body in the center of the packaging paper, on the packaging paper box length, wide extension, the long extension from the box Angle 1 box high do a mark, as the starting point to draw a line down, then use scissors to cut the line, hand press the box body on the folding paper wide edge, cut part paste on the wall of the box. Gently press the remaining wrapping paper on the wide edge and paste it to the long edge. Finally, the long side will present an isosceles trapezoid. fold the trapezoid into the box and paste it.

5. Packaging box cover

Cut out the box cover wrapping paper according to the method of cutting the box body wrapping paper. Put the cover in the center of the wrapping paper, draw on the wrapping paper box cover length of extension, wide, in the wide extension from box Angle 1 box high do a mark, as the starting point down a straight line, then use scissors to cut the line, along with the shorter edge into right Angle to fold up wrapping paper, so the wrapping paper is long, and wide and the cover of the long, wide, paste directly.

Six, the production of partition

According to their own needs to determine the number of partition, the more the number, the more grid. All partition width is equal to box height, long partition length (about) equal to box length, and short partition length (about) equal to box width. If the thickness of the box is less than one millimeter, the partition is cut according to the length and width of the box; instead, the size of the diameter and width of the box. After cutting the partition, stick both sides with wrapping paper.

Seven, make the partition frame

There are also grooves on the partition to facilitate card insertion, forming the partition frame, the number of grooves on each partition and the number of the partition to be inserted are equal, its width is the thickness of the partition, the long partition is cut from the top to the bottom 1 / 3, the short partition is cut from the bottom to the top 2 / 3.

http://www.hezehuaxing.com/